If you are interested in finding out more about microswitches, you are on the right page. In this article, we are going to take a look into different types of micro switches. This will help you opt for the right unit to meet your project needs. This article will give you a deeper insight into 6 types of these devices. Let’s check them out one by one. Read on to find out more.

Type of Switches

Listed below are the six types of these units. Although all of these have similar functions to perform, there is a difference between their designs. These are the differences that make them different from each other.

1. Microswitches

2. Push Button Switches

3. Rocker Switches

4. Rotary Switches

5. Slide Switches

6. Toggle Switches

1) Microswitches

Micro switches are tiny switches that feature a lever or push button. These units don’t require a lot of physical effort to work properly. Since these are quite small, they are designed for small scale application of projects.

2) Push Button type

These units can be found in a lot of styles and shapes. Apart from this, different types of materials are used to make them. When you push the button, it opens or closes a circuit. You can choose from either a momentary or latching type. The later stays turned on or off as long as you don’t press it again.

3) Rocker type

When you press this type of switch, it will rock the device button in order to close the contacts. Similarly, if you rock the switch to the other side, it will open the circuit. Again, these devices are available in different shapes and styles. For example, you can get it in two configurations: double pole or single pole.

4) Rotary type

As the name suggests, this type of unit involves moving contact. You can visualize the dial on a cooker to get a better understanding of how these switches work.

5) Slide type

Slide switches feature a small knob. If you want to open or close the circuit inside the device, you need to slide the knob in. Since they are compact units, there can be an ideal choice for small circuits of projects, especially where you need changeovers. For example, these devices are quite commonly used in the railway to change tracks for an incoming train.