The 3 wires (fire, zero, ground) of the torsion switch are connected to the socket, and if it is two fires and one ground, it is connected to the double switch. Two fires one connected to L1, one connected to L2, L11, 122 series connection after the pressure...

The stroke switch is mainly used to convert mechanical displacement into an electrical signal, so that the operating state of the motor can be changed, so as to control the mechanical action or used as a program control.The real use of the stroke switch is i...

Micro switch is a commonly used electronic component, which can sense the small movement of an object and convert it into an electrical signal. It is often used in switch control, circuit unlocking, mechanical induction and other occasions in electronic prod...

The micro switch is a switch with a small contact interval and a snap-action mechanism, which is switched with a specified stroke and a specified force. It is covered with a casing and has a drive rod on the outside. Because the contact distance of the switc...

In modern industrial assembly lines, processing inspection to ensure product quality has increasingly become the top priority in the entire production process in addition to safety. There have been solutions to how to achieve continuous detection. However, i...

Rated voltage: refers to the safety voltage allowed by the switch when it is in normal operation. A voltage greater than this value is applied to both ends of the switch, causing a firing breakdown between the two contacts.Rated current: refers to the maximu...

Conventional domestic travel switchAmong conventional travel switches, LX19-001/111 in LX19 series, LXK3-20S/T in LXK3 series, and JLXK1-111/411/511 in JLXK1 series are the most representative. These products have simple structure, practical functions and lo...

1. Principle and application of waterproof tact switchThe working principle of the waterproof tact switch: Example: After the 220V alternating current passes through the bulb H and the rectifier full bridge, it becomes a DC pulsating voltage, which is added ...

In the electrical control system, the function of the position switch is to realize sequence control, positioning control and position state detection. It is used to control the stroke and limit protection of mechanical equipment. Structure: It consists of o...

Beijing Yanjing Bizhi Information Consulting Co., Ltd. (XYZ-Research) has conducted in-depth research on the Control Foot Switch market, which evaluates the current and future market opportunities in the market. A number of key drivers and restraints influen...